Metal Removal's Standard (right-hand spiral)
Cut produces a smooth finish for general-purpose use on steel, cast iron, and other ferrous and non-ferrous materials.
Most Metal Removal carbide burs are available in the right-hand spiral design.
|
Master Cut (Double Cut)
Metal Removal's exclusive Master Cut, with its chisel-type cutting edge, is a machine ground tool built to exacting tolerances of concentricity, size, and shape. This accuracy, when combined with precision grinders, results in smooth-running, fast metal removal and fine finishes. The right- and left-hand helical flutes combine to produce a chisel-type cutting tooth. This results in faster penetration and stock removal with minimal bounce or chatter.
The Master Cut design also produces an easy-to-handle granular-type chip in most metals, as opposed to the conventional sliver-type chips.
Throughout its life, the Master Cut gives faster stock removal and less operator fatigue, and maintains a good finish on the widest possible variety of workpiece materials. 
|
Aluminum Cut
Metal Removal's Aluminum Cut burs are outstanding on soft or nonferrous type materials. Use the aluminum cut design on aluminum, magnesium, brass, lead, and most plastics.  |
|
|
Coarse Cut
Coarse Cut burs are favored for applications in softer materials such as brass, lead, annealed low-carbon steels, and some aluminum alloys. The combination of fewer flutes with greater depths provides chip clearance necessary for these matrials.
Available as specials.
|
Fine Cut RhS
Metal Removal's Fine Cut Right-Hand Spiral is used in applications where stock removal is light and workpiece finish is critical. A greater number of flutes reduces chip load and provides excellent control in deburring small intricate areas. Metal Removal now supplies many popular 1/8" and smaller diameter burs with fine cut configuration. Available as specials. 
|
Shank Styles 
A Shank
1/8" and 3 mm solid carbide shank
 B Shank
1/8" and 3 mm hardened steel shank
C Shank
1/4" and 3 mm hardened steel shank
D  Shank
1/8" and 3 mm solid carbide shank |
|
