Golden Seal Coolant Seal™
|
|
|
|
 |
- For use with straight-shank cutting tools with internal coolant-fed oil hole.
- Use on existing collets, no special collet nut, tools or hardware required.
- Golden Seal is simply inserted into the collet nut and the tool assembled as normal.
- Golden Seal is an excellent means to stop collet contamination at any PSI from chips or grinding dust.
- Seals 800 PSI.
|
| PG 100 COOLANT SEALS |
| Part Number |
Range (Inch) |
| CSPG100-0141 |
.122 - .141 |
| CSPG100-0160 |
.142 - .160 |
| CSPG100-0180 |
.161 - .180 |
| CSPG100-0200 |
.181 - .200 |
| CSPG100-0220 |
.201 - .220 |
| CSPG100-0240 |
.221 - .240 |
| CSPG100-0260 |
.241 - .260 |
| CSPG100-0280 |
.261 - .280 |
| CSPG100-0300 |
.281 - .300 |
| CSPG100-0319 |
.301 - .319 |
| CSPG100-0339 |
.320 - .339 |
| CSPG100-0359 |
.340 - .359 |
| CSPG100-0379 |
.360 - .379 |
| CSPG100-0398 |
.380 - .398 |
| CSPG100-0417 |
.399 - .417 |
| CSPG100-0437 |
.418 - .437 |
| CSPG100-0457 |
.438 - .457 |
| CSPG100-0477 |
.458 - .477 |
| CSPG100-0497 |
.478 - .497 |
| CSPG100-0516 |
.498 - .516 |
| CSPG100-0536 |
.517 - .536 |
| CSPG100-0556 |
.547 - .556 |
| CSPG100-0575 |
.557 - .575 |
| CSPG100-0595 |
.576 - .595 |
| CSPG100-0614 |
.596 - .614 |
| CSPG100-0634 |
.615 - .634 |
| CSPG100-0654 |
.635 - .654 |
| CSPG100-0673 |
.655 - .673 |
| CSPG100-0693 |
.674 - .693 |
| CSPG100-0713 |
.694 - .713 |
| CSPG100-0732 |
.714 - .732 |
| CSPG100-0750 |
.75 |
| CSPG100-0752 |
.733 - .752 |
| CSPG100-0772 |
.753 - .772 |
| CSPG100-0792 |
.773 - .792 |
| CSPG100-0811 |
.793 - .811 |
| CSPG100-0831 |
.812 - .831 |
| CSPG100-0851 |
.832 - .851 |
| CSPG100-0870 |
.852 - .870 |
| CSPG100-0890 |
.871 - .890 |
| CSPG100-0910 |
.891 - .910 |
| CSPG100-0929 |
.911 - .929 |
| CSPG100-0949 |
.930 - .949 |
| CSPG100-0969 |
.950 - .969 |
| CSPG100-0988 |
.970 - .988 |
| CSPG100-1008 |
.989 - 1.008 |
| CSPG100-S046 |
- |
|
