|
Precision Finish Boring Heads from .984" to 6.00"
|
|
|
 |
  |
|
Precision Finish Boring Heads with Extended Length Insert Holders
- A .0001” (.002mm) vernier is standard on all heads eliminating the
need to purchase expensive .0001” (.002mm) heads.
- Micrometer spindle provides .001” (.02mm) per dial graduation for fast, accurate set-up and adjustment, and reduced scrap.
- No movement between lock and unlock eliminates setting errors common to other systems.
- Well balanced, fully encased in head tool carrier can be run at high speeds.
- Through-spindle coolant capability is standard.
- Replacement insert holder allows for inexpensive pocket replacement and changing of pocket geometry.
.001” per dial graduation with .0001” Vernier.
| STANDARD |
| Part Number |
Bore Range Min. |
Bore Range Max. |
Insert Holder Size |
Connection Size |
B (Dia.) |
C |
Insert Holder Screwl |
Insert Type and Size |
Weight (lbs.) |
| PC2-2215 |
0.984 |
1.300 |
2 |
PC2 |
0.925 |
1.48 |
2215-01 |
TCMT 06** |
0.3 |
| PC3-2315 |
1.240 |
1.654 |
3 |
PC3 |
1.201 |
1.61 |
2315-01 |
TCMT 06** |
0.5 |
| PC4-2415 |
1.614 |
2.126 |
4 |
PC4 |
1.496 |
1.85 |
2415-01 |
TCMT 11 |
0.9 |
| PC5-2515 |
2.087 |
2.756 |
5 |
PC5 |
1.929 |
2.24 |
2515-01 |
TCMT 11 |
1.8 |
| PC6-2615 |
2.677 |
4.000 |
6 |
PC6 |
2.480 |
2.79 |
2615-01 |
TCMT 11 |
3.9 |
| PC6-2616 |
3.937 |
6.000 |
7 |
PC6 |
3.740 |
2.79 |
2615-01 |
TCMT 11 |
6.5 |
| PC7-2716 |
3.937 |
6.000 |
7 |
PC7 |
3.740 |
3.425 |
2615-01 |
TCMT 11 |
7.5 |
* 3° Insert Holders are standard and are included on Boring Head.
Others are optional insert holders and are purchased separately, these are not recommended for dedicated production jobs.
** Note: Additional clearance required for nose radius above .016" |
|
|
